Tube Bender Sound Samples - Please note: this pedal is now sold out and will be unavailable for the foreseeable future
The first three samples were recorded with a Fender Stratocaster guitar played through the Tube Bender into a Fender Pro Reverb combo amp at moderate volume, with the recording taken attenuated direct from the amps speaker; The last three samples used the same guitar and Tube Bender pedal, but via a Selmer Treble and Bass 50 Mk2 valve amp set clean via a closed back 2 by 12 cab loaded with Celestion G12 speakers and mic'd up approx 6 inches away with an off-axis Shure SM58 dynamic microphone. No EQ or compression was used on these samples. To see the distortion clipping in the waveform, if you have a recent version of Windows Media Player, set the display to Bars and Waves: Scope. The distortion that you hear comes entirely from the Tube Bender and not the Amp.
WAV Format Samples
Warning: Each sample may take several minutes to load using a 56K modem connection, but much quicker with broadband.
Sample 1 Feedback - where would Rock'n Roll be without it? This was at medium volume
Sample 2 A heavy riff on bridge pickup - drive about 60 percent
Sample 3 Starts off clean and gets dirtier by increasing volume on guitar only
Sample 4 Low to medium drive setting using neck pickup
Sample 5 Hear the second harmonic as the notes die away; high drive, guitar tone on zero
Sample 6 Full drive, neck pickup with guitar tone at zero. Hey everyone, it's 1967!
Streamed Format Samples
These are recommended for people using a 56K dial up modem, and are generally quicker to download; same descriptions as above.
Sample 1
Sample 2
Sample 3
Sample 4
Sample 5
Sample 6 |
To hear Lovetone sound samples or see the Lovetone Client List, please visit the Lovetone website, by clicking on "Lovetone" below.
|
